The effect of various fire‐exposed surface dimensions on the spalling of concrete specimens

Concrete spalling due to fire exposure is often defined as the sudden detachment of fragments from a concrete surface. It can be quantified by various parameters of which weight loss and spalling depth are the most common ones. The risk of spalling is influenced by many factors such as concrete composition, heating rate and applied testing methods. A reduced scale testing method should be developed to analyse the spalling behaviour and to understand its effectiveness in more detail. As a subsection of this development, this study aimed to analyse the effect of different‐sized, circular heated areas in semi full‐scale fire tests. Therefore, vermiculite slabs with varying cut‐outs in their centre were placed between a specimen made of a spalling‐sensitive concrete and the combustion chamber. The combustion chamber was heated following a standard fire curve. Our experimental results show that the thermal expansion inside of equal‐sized specimens is strongly dependent on the size of the heated area. In addition, this area also affects thermal stresses. They decrease as a result of lower temperature gradients for tests with smaller unheated boundary areas. Apart from this, the analysis of fragments shows no correlation between their relative volume distribution and the heated area. Copyright © 2014 John Wiley & Sons, Ltd.     

Low complexity quantum private queries protocol

Private information retrieval(PIR) is an important privacy protection issue of secure multi-party computation, but the PIR protocols based on classical cryptography are vulnerable because of new technologies,such as quantum computing and cloud computing. The quantum private queries(QPQ) protocols available, however, has a high complexity and is inefficient in the face of large database. This paper, based on the QKD technology which is mature now, proposes a novel QPQ protocol utilizing the key dilution and auxiliary parameter. Only N quits are required to be sent in the quantum channel to generate the raw key, then the straight k bits in the raw key are added bitwise to dilute the raw key, and a final key is consequently obtained to encrypt the database. By flexible adjusting of auxiliary parameters θ and k, privacy is secured and the query success ratio is improved. Feasibility and performance analyses indicate that the protocol has a high success ratio in first-trial query and is easy to implement, and that the communication complexity of O(N) is achieved.     

车载空调控制器的新型按键旋钮溃缩设计

本文针对乘用车内部凸出物的法规要求对车载空调控制器的旋钮按键溃缩进行了研究和设计，描述了这种新型旋钮按键溃缩设计相对于目前常用的方案在成本、空间、可靠性等方面的优势。根据实际设计结果表明，本文所应用的新型旋钮按键溃缩设计能在成本与空间有限的情况下可靠的满足法规对乘用车内部凸出物的要求，为乘用车内部凸出物溃缩方案提供了新方向，值得我们推广应用。     

核燃料循环设施安全关键岗位识别方法初探

研究建立了基于岗位的工作责任、安全风险和专业技能等特性指标的核燃料循环设施安全关键岗位识别方法,给出了核燃料循环设施安全关键岗位的定义、识别指标体系、识别原则、识别评价流程和后处理设施应用案例。     

Identification of Wiener systems based on the variable forgetting factor multierror stochastic gradient and the key term separation

The identification of Wiener systems is very difficult because of the output nonlinearity and the parameter product term. To identify the Wiener system, a novel stochastic gradient algorithm based on the multierror and the key term separation is proposed. Firstly, the Wiener system is parameterized as a pseudo-linear model to avoid the products of the parameters. Secondly, a parzen window is used to estimate the probability density function of the error. Thirdly, a stochastic information gradient algorithm with the multierror is adopted to estimate the parameters. The multierror takes the place of the scalar error by the stacked error, which accelerates the algorithm greatly. Fourthly, a variable forgetting factor considering errors is integrated to further speed the algorithm up. Finally, the proposed algorithm is validated by a numerical example and an industrial case. The estimation results indicate that the proposed algorithm can obtain accurate estimates with fast convergence speed.     

Occupational exposure and health risks of volatile organic compounds of hotel housekeepers: Field measurements of exposure and health risks

Hotel housekeepers represent a large, low-income, predominantly minority, and high-risk workforce. Little is known about their exposure to chemicals, including volatile organic compounds (VOCs). This study evaluates VOC exposures of housekeepers, sources and factors affecting VOC levels, and provides preliminary estimates of VOC-related health risks. We utilized indoor and personal sampling at two hotels, assessed ventilation, and characterized the VOC composition of cleaning agents. Personal sampling of hotel staff showed a total target VOC concentration of 57 ± 36 µg/m³ (mean ± SD), about twice that of indoor samples. VOCs of greatest health significance included chloroform and formaldehyde. Several workers had exposure to alkanes that could cause non-cancer effects. VOC levels were negatively correlated with estimated air change rates. The composition and concentrations of the tested products and air samples helped identify possible emission sources, which included building sources (for formaldehyde), disinfection by-products in the laundry room, and cleaning products. VOC levels and the derived health risks in this study were at the lower range found in the US buildings. The excess lifetime cancer risk (average of 4.1 × 10⁻⁵) still indicates a need to lower exposure by reducing or removing toxic constituents, especially formaldehyde, or by increasing ventilation rates.     

Characterization and exposure assessment of household fine particulate matter pollution in China

Household fine particulate matter (PM_2.5) pollution greatly impacts residents' health. To explore the current national situation of household PM_2.5 pollution in China, a study was conducted based on literature published from 1998 to 2018. After extracting data from the literature in conformity with the requirements, the nationwide household-weighted mean concentration of household PM_2.5 (HPL) was calculated. Subgroup analyses of spatial, geographic, and temporal differences were also done. The estimated overall HPL in China was 132.2 ± 117.7 μg/m³. HPL in the rural area (164.3 ± 104.5 μg/m³) was higher than that in the urban area (123.9 ± 122.3 μg/m³). For HPLs of indoor sampling sites, the kitchen was the highest, followed by the bedroom and living room. There were significant differences of geographic distributions. The HPLs in the South were higher than the North in four seasons. The inhaled dose of household PM_2.5 among school-age children differed from provinces with the highest dose up to 5.9 μg/(kg·d). Countermeasures should be carried out to reduce indoor pollution and safeguard health urgently.     

Estimating long-term time-resolved indoor PM2.5 of outdoor and indoor origin using easily obtainable inputs

To evaluate the separate impacts on human health and establish effective control strategies, it is crucial to estimate the contribution of outdoor infiltration and indoor emission to indoor PM_2.5 in buildings. This study used an algorithm to automatically estimate the long-term time-resolved indoor PM_2.5 of outdoor and indoor origin in real apartments with natural ventilation. The inputs for the algorithm were only the time-resolved indoor/outdoor PM_2.5 concentrations and occupants’ window actions, which were easily obtained from the low-cost sensors. This study first applied the algorithm in an apartment in Tianjin, China. The indoor/outdoor contribution to the gross indoor exposure and time-resolved infiltration factor were automatically estimated using the algorithm. The influence of outdoor PM_2.5 data source and algorithm parameters on the estimated results was analyzed. The algorithm was then applied in four other apartments located in Chongqing, Shenyang, Xi'an, and Urumqi to further demonstrate its feasibility. The results provided indirect evidence, such as the plausible explanations for seasonal and spatial variation, to partially support the success of the algorithm used in real apartments. Through the analysis, this study also identified several further development directions to facilitate the practical applications of the algorithm, such as robust long-term outdoor PM_2.5 monitoring using low-cost light-scattering sensors.     

Estimates of pollutant temporal and spatial variability in commercial buildings from the joint urban 2003 field experiments

In this paper, we report on the indoor concentrations from a suite of full-scale outdoor tracer-gas point releases conducted in the downtown area of Oklahoma City in 2003. A point release experiment consisted of releases of sulfur hexafluoride (SF₆) in multiple buildings and from different outdoor locations. From the measurements, we are able to estimate the concentration variations indoors for a building operating under “typical” operating conditions. The mean indoor spatial coefficients of variation are 30% to 45% from a daytime outdoor release are around 80% during an outdoor evening release. Having estimates of the spatial coefficient of variation provides stakeholders, including first responders, with the likely range of concentrations in the building when little is known about the building characteristics and operating behavior, such as developing urban-scale hazard and consequence analyses. We show differences in indoor measurements at different distances to the release points, floors of the building, and heating, ventilation, and air conditioning system (HVAC) operation. We also show estimates at different time resolutions. The statistics show that in the studied medium to large commercial buildings, spatial differences would result in peak indoor concentrations in certain parts of the buildings that may be substantially higher than the building average. To our knowledge, very few tracer gas measurements have been conducted in buildings of this scope, particularly with measurements on multiple floors and within a floor. The resulting estimates of spatial variability provide a unique opportunity for hazard assessment, and comparison to multi-zone models.     

可视化远程控制（无人）转载系统的研究

针对井下巷道内快速机械化进行采掘物料转载、装料等操作困难的问题，分析了实际工况的要求，设计了一种采用带可视化系统、能够远程操控、现场无人值守工作方式、液压为驱动力的井下巷道转载系统。经过现场验证，该系统解决了大方量物料在井下巷道内转载、装料的问题，从而节约传统的人工岗位，提高了工作效率，增强了工作中的可靠安全性。